Advanced Search

Lakeland Fiber Locating ProceduresNever skin or cut a locate wire.If this is done, immediately tape it up and call Neil Cleveland at Lakeland - 813.957.3965Breakpoint will be back charged for repairs, and those repairs may be passed on to the locator. Do not s...

process

procedures

procedure

lakeland fiber

fiber

lakeland

OUC

Contract Specific Procedures

blah blah blah

What is Ground Penetrating Radar?

Locating Equipment Geophysical Survey Systems, Inc. GPR

Ground Penetrating Radar (GPR), also called georadar or ground probing radar. GPR uses three main components: a control unit, an antenna, and a power supply. GSSI GPR systems can operate on various power sources, including small rechargeable batteries, vehicle...

RD8200 Hardware Layout

Locating Equipment RD8200

KeypadLCD with auto backlightHaptic (vibration) feedbackSpeakerBattery compartmentAccessory connectorHeadphone connectorBluetooth module antennaSWING Warning systemOptional Lithium-Ion battery packUSB connector (inside the battery compartment)Power k...

RD7200 Hardware Layout

Locating Equipment RD7200

OIL CHANGE

VEHICLES MAINTENANCE

ProcedureWhen it’s dueIf the dash indicator comes on or your mileage/sticker says it’s due, it’s time.What you doNotify the Fleet Manager immediately that your vehicle is due for service.Fleet Manager: 813-892-4069Wait for instructions on when and where to go....

TIRES

VEHICLES MAINTENANCE

APPEARANCE

VEHICLES MAINTENANCE

Delaying tickets

811 Ticket system

Induction Clamp

Locating Equipment Active Frequencies

An optional signal clamp can be connected to the transmitter and clamped around a cable or pipe to apply the transmitter signal. This method of applying the transmitter signal is particularly useful on insulated live wires and removes the need to disconnect th...

Direct Connection

Locating Equipment Active Frequencies

In Direct Connection, you connect the transmitter output directly to the utility. The transmitter will then apply a discrete signal which you can locate using the locator. This is the preferred method of applying a transmitter signal to a utility and in the ma...

Choice of Frequency

Locating Equipment Active Frequencies

512 kHzThis low frequency is most useful for line tracing and identification over long distances. It does not couple easily to unwanted lines. but It is too low for induction, and it falls within the band of power freque...

RD7200 Utility Hookup Quick Card

Utility Hookup Guides Printable Guides

Water:Metallic: Direct connect to valve/hydrantPlastic (PVC) w/ tracer wire: Red to tracer wire Black to ground stake No tracer wire: Use sondeFreq: 8 kHz–33 kHzSewer:Non-metallic: Use sonde in cleanout/cameraMetallic (rare): Direct connectFreq: 33 kHz or 512 ...

Locator Reference Guide Checklist

Utility Hookup Guides Printable Guides

Utility Locating Quick Reference Guide 1. Arrival & Safety Check in & review site maps Wear PPE (vest, hard hat, gloves, boots, glasses) Walk job site & identify hazards Plan which utilities need locating 2. Equipment Setup Inspect & power on RD7200/RD8200 Run...

OUC Update Files and Data

IT Archive

GIS Contact info - Dawn Harris - GIS Supervisor - DHarris@ouc.comMichael Weiner - GIS Programmer - MWeiner@ouc.comOUC updates are provided via an FTP connection. Using an FTP client (CoreFTP is preferred by OUC), below is an example of the connection profile. ...

Brevard Update Process

IT Archive

GIS Contact info - Newman, Rae <Rae.Newman@brevardfl.gov>The Brevard updates will be sent to you via email. Request them from Rae Newman. Once you have downloaded the Brevard GIS data, download the attached "Import to PostGIS.zip" file, and then unzip it. Unzi...

Lake Worth Update Process

IT Archive

More Results